Welcome to Warm Floor Comfort!

PEX Heat Transfer Plates - The Basic Things

The main motive behind developing Stamped Heat Transfer Plate is to resolve two main issues, first one is associated with radiant heated floors and other is with noise and cold spots. These issues may arise from time to time. When PEX tubing comes in direct contact of mounting space, it creates noise due to expansion and contraction of tubing. This may be caused in respond of the thermal changes. To minimize the contact of PEX tubing with mounting surface omega like shaped heat transfer plates are used. This helps in reducing and eliminating the noise. While some manufacturers also recommend that silicone sealant can also be used in the tubing channels to reduce the noise.

By installing PEX heat transfer plate response time may be increased as well as heat distribution properties of radiant heating system also gets increased. Installation creates a jagged distribution of heat because tubing provides to the surface above it, the greatest amount of heat. This leaves the core between the tubing to run at the coldest spot. Aluminum heat transfer plates helps in maximizing the heat transfer area of tubing with surface of flooring. It acts as a medium allowing greater evenly transfer of heat inste3ad of using PEX tubing alone.

There is a great variety of heat transfer plates available nowadays. While selecting any of the heat transfer plates it is important to understand the differences among them. The selection depends upon the type of project and its requirement. Commonly PEX heat transfer plates are available in two basic types, one is extru8ded and other one is stamped. Extrude version of heat transfer plates is the thicker one while stamped version is thinner one. Selection is not based only on the thickness of plates. THICK heat transfer plates are designed mainly for installations in below subfloor. A reversed omega shaped channel is a newer design which helps in completely eliminating the noise and allows easier and faster installations. Thinner heat transfer plates are designed to be used where PEX tubing is placed between finished floor and subfloor.

Thus thickness and surface area are the most important features of PEX heat transfer plates. These both represent the response time and even heat distribution of the system.

PEX Tubing, Taco Circulator Pumps, Takagi Tankless Water Heaters