Welcome to Warm Floor Comfort!

Your online guide to Radiant Heating Installation

Varied Applications Of Taco 0010 F3

The Taco 0010 F3 Cast Iron Circulator Pump is widely used across several different applications. Common areas of its usage include those such as radiant heating, hydronic heating, chilled type water cooling, secondary and primary loops, water heating of indirect means, hot water devices of potable water requirements etc.

Features

Some of the features of the 0010-F3 Taco that make it stand out from so many other pumps within its class include compact design, high capacity of output, low consumption of power as well as direct drive, efficiency and quietness of operation etc. There is no mechanical sealing present inside and the Taco 0010 Cast Iron Circulator Pump comes replete with self lubricating system that ensures a long lasting performance from the pump. The special cartridge is of a replaceable design, which entails that you need not replace the entire pump in case there is a repair needed. Just a replacement of the cartridge will be sufficient for this purpose. The pump comes with almost zero maintenance as well as high degree of reliability. The flange dimensions are end to end and universal. The construction of the Taco 0010 Cast Iron Circulator Pump comes either in bronze or cast iron.

Performance

The average flow rate is around 0-30 GPM while temperature ranges need to be between 40 and 230 degree Fahrenheit. The maximum tolerable working pressure should be around 125 PSI while the connection sizes of the 0010-F3 Taco are available in 1, ¾, 1-1/4, 1-1/2 inch etc.