Welcome to Warm Floor Comfort!
Taco Low Water Cutoffs (LWCO)
Taco low water cutoff is considered to be the most important safety devices for the boilers. Taco low water cutoffs are used for providing accurate & dependable boiler protection. It offers simple, reliable & unmatched quality. In the Taco low water reset it has a microprocessor which helps in detecting the fluid level in the hot water and the steam boilers. It provides external LED, the patented signal processing technology & simple wiring arrangement which makes the installation & testing easier.
With the use of Taco Low Water Cutoffs, one can provide protection to all the boiler types like small residential boilers, large industrial boiler. Each manufacturer has specified the boiler's safe minimum water level. One should remember to check the water level because if the water level dips below the specified water level, the heat will immediately get accumulated which will cause significant damage to boiler. It poses as a potential safety hazard however; the Taco Low Water Cutoffs helps in preventing this hazard.
Taco Low Water Cutoffs can be either used as the primary or the secondary low water cutoff on boilers having capacity up to 250 PSI. It also provides with the feature of activating alarm system or the automatic water feeder. Taco Low Water Cutoffs has incorporated the patented signal processing technology which helps in delivering the best lowest water protection available in the market. It has the smart feature of indicating when the probe needs to be cleaned and at the same time it also eliminates the need for twelve-monthly maintenance. It facilitates the simplified wiring along with the installation.
The test button in the Taco Low Water Cutoffs helps to verify if the wiring and the installation has been done correctly. LED lights also help in identifying if the low water condition was due to the dirty water or insufficient water.
The Taco LTR0243T, Taco LTA1203S & Taco LF series of LWCO match the installation and the safety requirements of all the systems. It helps in ensuing that the system was correctly connected the first time. It has the following features:
- It offers the feature of patented adjustable probe sensitivity.
- It has the External LEDs.
- It has simplified the installation, wiring and the testing.
- It is available in 120 VAC or 24 VAC.
- It provides the connectivity in both the ½ and ¾ NPT.
- The Lt Model also includes the features of adjustable delay on break, delay or make & external test button.
PEX Tubing, Taco Circulator Pumps, Takagi Tankless Water Heaters